Wheel Stud, ARP, for Good Parts Rear Hub manufactured 4/10/2023 and later (choose length)

Description

These ARP wheel studs are a direct replacement for your Good Parts rear hub assembly (SKU 112) manufactured 4/10/2023 and later.  Earlier Good Parts rear hubs were fitted with Dorman studs which used a slightly smaller hole.  These ARP studs can be fitted to earlier Good Parts rear hubs by enlarging the holes from 0.464″ to 0.471″.  For direct replacement studs for Good Parts rear hubs prior to 4/10/2023, see the listing “Wheel Stud, Dorman, for Good Parts Rear hub through 4/9/2023” or click the link HERE.

These studs are for Good Parts rear hubs only, they do NOT fit original hubs.

Available Stud Lengths:

7/8″ = Wire wheels

1-3/16″ = Factory steel wheels and most aftermarket alloy wheels

1-3/8″ = Alloy wheels with thicker center flange (may require measuring to ensure proper lug nut thread depth)

1-9/16″ or 1-3/4″ = Wheels + wheel spacers

2-1/2″ (+1/4″ unthreaded nose) = Full length for custom cutting or open ended lug nuts

NOTE: These studs are standard 7/16-20 thread.  Stud length is measured from face of hub flange without the brake drum installed.