Currency:
Catalog
Search

Upgrade front braking with Wilwood four piston calipers. Available in two piston sizes to tune braking to your preference. Smaller pistons in the front calipers give you shorter pedal travel, firm pedal feel with more braking effort required and bias more braking to the rear. Larger pistons in the front calipers offer lighter pedal feel but slightly more pedal travel and bias more braking to the front. Too much rear brake bias may cause dangerous rear brake lock-up. Caliper kits are offered for the stock size 10.82" x .5" solid rotors, Wilwood 10.75 x .81" vented rotors and for Wilwood 11.0" x .81" vented rotors. The stock steel wheels do not fit with the 11.0" rotors. Kits are priced without brake pads to allow your choice of pads. Some selection of Wilwood pads are listed below. Other Wilwood pads are available. Descriptions available at wilwood.com or request info from Good Parts. Braking needs can vary from one vehicle to another due to tire size, suspension settings, weight and other factors. Good Parts makes no recommendation as to the suitability of a particular piston size or brake pad combination for your vehicle.

WARNING: Optimum braking is achieved with the correct balance of front to rear bias. Too much braking power in the front reduces overall braking because the rear is contributing less. Too much rear braking is very dangerous because rear lock-up can cause the car to spin. TEST YOUR BRAKES in a safe place where there is no danger to (or from) other people or vehicles BEFORE driving on the street.

Sort by: name (ascending | descending), price (ascending | descending), customer rating (ascending | descending)

Includes two Wilwood four piston calipers with 1.38" pistons, mounting hardware and braided stainless steel flexlines to connect from the hard line on the frame to the caliper. Does not include brake pads. Order your choice of pads below. Uses stock size 10.82" x .5" rotor (not included). Easy bolt-on installation. Fits with all wheels. Each caliper weighs only 4.9 lbs compared to the stock caliper at 9.6 lbs. This reduces unsprung weight by 4.7 lbs per side!

US $545.00

Includes two Wilwood four piston calipers with 1.62" pistons, mounting hardware and braided stainless steel flexlines to connect from the hard line on the frame to the caliper. Does not include brake pads. Order your choice of pads below. Uses stock size 10.82" x .5" rotor (not included). Easy bolt-on installation. Fits with all wheels. Each caliper weighs only 4.9 lbs compared to the stock caliper at 9.6 lbs. This reduces unsprung weight by 4.7 lbs per side!

US $545.00

Includes two Wilwood four piston calipers with 1.38" pistons, rotor mounting hats, hardware and braided stainless steel flexlines to connect from the hard line on the frame to the caliper. Does not include brake pads. Order your choice of pads below. Uses Wilwood vented 10.75" x .81" rotor (not included, order below). Easy bolt-on installation. Fits with all wheels. Each caliper weighs only 4.9 lbs compared to the stock caliper at 9.6 lbs. Also the hat and rotor is 1.5 lbs lighter than the stock rotor. This reduces unsprung weight by a total of 6.2 lbs per side!

US $799.00

Includes two Wilwood four piston calipers with 1.62" pistons, rotor mounting hats, hardware and braided stainless steel flexlines to connect from the hard line on the frame to the caliper. Does not include brake pads. Order your choice of pads below. Uses Wilwood vented 10.75" x .81" rotor (not included, order below). Easy bolt-on installation. Fits with all wheels. Each caliper weighs only 4.9 lbs compared to the stock caliper at 9.6 lbs. Also the hat and rotor is 1.5 lbs lighter than the stock rotor. This reduces unsprung weight by a total of 6.2 lbs per side!

US $799.00

Does not fit with stock steel wheels. Fits with alloys or wire wheels.

Includes two Wilwood four piston calipers with 1.38" pistons, rotor mounting hats, hardware and braided stainless steel flexlines to connect from the hard line on the frame to the caliper. Does not include brake pads. Order your choice of pads below. Uses Wilwood vented 11.0" x .81" rotor (not included, order below). Easy bolt-on installation. Fits with all wheels. Each caliper weighs only 4.9 lbs compared to the stock caliper at 9.6 lbs. Also the hat and rotor is 1.2 lbs lighter than the stock rotor. This reduces unsprung weight by a total of 5.9 lbs per side!

US $769.00

Does not fit with stock steel wheels. Fits with alloys or wire wheels.

Includes two Wilwood four piston calipers with 1.62" pistons, rotor mounting hats, hardware and braided stainless steel flexlines to connect from the hard line on the frame to the caliper. Does not include brake pads. Order your choice of pads below. Uses Wilwood vented 11.0" x .81" rotor (not included, order below). Easy bolt-on installation. Fits with all wheels. Each caliper weighs only 4.9 lbs compared to the stock caliper at 9.6 lbs. Also the hat and rotor is 1.2 lbs lighter than the stock rotor. This reduces unsprung weight by a total of 5.9 lbs per side!

US $769.00

Includes pads for both sides.  Fits Wilwood calipers only.  Does not fit original calipers.

Heavy duty pads with increased friction and temperature range over OE type compound pads. Beds quickly and provides fast response without excessive abrasion on rotors.

Heat Range: Low to Med-High *** Cold Torque: Medium *** Hot Torque: Medium - High *** Wear Rate: Medium

US $54.00

Includes pads for both sides.  Fits Wilwood calipers only.  Does not fit original calipers.

Very consistend positive driver's feel over full temperature range.  Dual purpose street and rally, auto-cross and track day events.

Heat Range: Low to Med - High

Cold Torque: Medium - High

Hot Torque: Medium - High

Wear Rate: Medium

US $99.00

Includes pads for both sides.  Fits Wilwood calipers only.  Does not fit original calipers.

Intermediate duty road racing, autocross and rally.

Heat Range: Medium to X-High *** Cold Torque: Medium - High *** Hot Torque: High *** Wear Rate: Low

US $146.00

Price per pair.

Stock replacement rotors

US $69.00

Price per pair.

Made by TRW. Drilled and slotted to improve braking by venting of gasses. Same size as stock rotor.

US $129.00

Ultra-Light ULHP straight vane rotors provide high value performance and rugged durability for a wide range of performance and sport driving applications.

US $189.00

SRP Black Electro Coat Drilled Performance Series Rotors feature a specially engineered directional cross drill and face slot pattern that improve brake response and pad performance throughout the entire range of light to heavy braking. The black electro coat inhibits corrosion on all areas of the rotor.

US $299.00

Ultra-Light ULHP straight vane rotors provide high value performance and rugged durability for a wide range of performance and sport driving applications.

US $189.00

SRP Black Electro Coat Drilled Performance Series Rotors feature a specially engineered directional cross drill and face slot pattern that improve brake response and pad performance throughout the entire range of light to heavy braking. The black electro coat inhibits corrosion on all areas of the rotor.

US $299.00
(empty)
 
Blog / News
10/09/2017 06:49:59
Subscribe for email newsletter (blog):
or RSS 2.0
Survey



© GoodParts.
Powered by WebAsyst Shop-Script shopping cart software