Currency:
Catalog
Search

Sort by: name (ascending | descending), price (ascending | descending), customer rating (ascending | descending)

These are top quality USA made valve locks.

US $7.50

Handles up to approximately .470" lift.  Includes spacer washers for under inner springs to help center springs around guide.

US $85.00

Handles up to approximately .500" lift.  Includes spacer washers for under inner springs to help center springs around guide.

US $85.00

Price per each. Use for intake and exhaust. Fits spring set above and original springs. Weighs 6.1 grams compared to original 11.3 gram intake and 12.3 gram exhaust. Increases installed height of spring approx .050".

US $18.00

Price per each. Hardened spring seat keeps springs from wearing into head and centers the inner and outer springs around the guide. Springs are raised .040" above the surface of the head.  Fits outer spring OD 1.125" and inner spring ID .585".

US $5.00

Price per each.

US $6.00

Price per each.

US $25.00

Price per each

US $33.00

Price per each.

US $8.00

Price per each.

US $27.00

Price per each. Can be used in later head by enlarging seat.

US $8.00

Price per each. Can be used in later head by enlarging seat.

US $27.00
US $27.00
US $4.50

Price per each.

US $4.50

Intake guide for TR2, TR3, TR4, TR250, TR6, GT6 1968 - 1973.  Intake and Exhaust guide for TR4A, Spitfire 1967 - 1980, MG Midget 1500 1975 - 1979.             

US $5.50

Exhaust guide for GT6 1968 - 1973, TR250, TR6.  Intake and exhaust guide Spitfire 1962 - 1967.

US $5.50

These Viton seals fit over the standard .50" diameter valve guide and fit inside of the dual valve springs.

US $24.00

These Viton seals fit over the standard .50" diameter valve guide and fit inside of the dual valve springs.

US $2.00

Small diameter seal to fit on guide which has been turned down to .415" diameter and fit inside inner valve spring.

US $24.00

Seal to fit on full size guide. Does not fit inside inner valve spring. Use with single valve springs only.

US $24.00

Push rods are measured by "Effective Length" from the bottom of the cup to the lower end.  Lengths other than those listed are available by special order.

US $119.00

These push rods are 5/16" diameter with .049" wall thickness and are rated for up to 500 lbs valve spring pressure.  Valve springs used in the TR6 engine are generally under 200 lbs at full open so these push rods offer more than ample strength margin.  With each push rod weighing about 7 grams less than the original, I believe these push rods offer the best strength to weight ratio.

US $149.00

These push rods are 5/16" diameter with .049" wall thickness and are rated for up to 500 lbs valve spring pressure.  Valve springs used in the TR6 engine are generally under 200 lbs at full open so these push rods offer more than ample strength margin.  With each push rod weighing about 10 grams less than the original, I believe these push rods offer the best strength to weight ratio.

US $149.00

Push rods are measured by "Effective Length" from the bottom of the cup to the lower end.  Lengths other than those listed are available by special order.

US $119.00
US $45.00
(empty)
 
Blog / News
Subscribe for email newsletter (blog):
or RSS 2.0
Survey



© GoodParts.
Powered by WebAsyst Shop-Script shopping cart software