Neapco           Other
Larger Trunnion

Neapco       Other
Thicker Cross

Good Parts recommends Neapco heavy duty Universal Joints for axles and driveshafts.

  • Longer, larger diameter trunnions provide 44% more needle bearing contact surface to handle the load and resist wear.
  • Larger diameter trunnions and thicker cross protects against fracture
  • Precision ground trunnions and bearing cups extend life.
  • Available with grease fitting in bearing cap to avoid weakening the cross for use in the axles or with conventional grease fitting in the cross for use in the driveshaft where there is much less stress.

Sort by: name (ascending | descending), price (ascending | descending), customer rating (ascending | descending)

Neapco Heavy Duty Universal Joint with grease fitting in cap to avoid weakengine the cross.  Use these maximum strength joints in the axles where the applid torque is 3.7 times greater than at the driveshaft. 

The grease fitting of any U-Joint used in the outer end of the axle is inaccessable inside the trailing arm.  For this location, the grease fitting may be installed after assembling the joint to pump it full of grease then removed and replaced with a plug for installation and operation.

These joints may be used in the driveshaft also but the ones with the grease fitting in the cross are recommended.  Especialy when using the Nissan R200 differential since close clearance prevents leaving the grease fitting in the rear joint during operation.

US $29.00
Blog / News
04/04/2017 05:40:03
Subscribe for email newsletter (blog):
or RSS 2.0

© GoodParts.
Powered by WebAsyst Shop-Script shopping cart software